Fridge Freezer Disposal

Guide · Businesses · 3 min read · Updated 17 November 2026

Commercial Refrigeration Disposal: A Guide for Businesses

Short answer

Businesses must dispose of commercial fridges, display chillers, bottle coolers, ice machines and freezers through a registered waste carrier and an approved treatment facility. Larger units may need their refrigerant recovered by a qualified engineer before removal. Commercial units containing ozone-depleting substances are hazardous waste, so the correct paperwork must be used. Guide prices start from £80 per unit, with refrigerant recovery priced separately.

Commercial Refrigeration Disposal: A Guide for Businesses

What counts as commercial refrigeration

Commercial refrigeration covers a wide range of equipment used in shops, pubs, restaurants, cafés, hotels, offices and food production. Plug-in units are self-contained, with the compressor built in, and include bottle coolers, display chillers, under-counter fridges and ice machines. Larger systems, such as walk-in cold rooms and supermarket display cabinets, often have remote condensing units connected by refrigerant pipework.

The type of equipment affects how it is removed. Plug-in units can usually be collected whole, much like a domestic fridge. Remote systems need an engineer to recover the refrigerant and disconnect the pipework before anything is moved.

If you are unsure which type you have, look for a separate outdoor unit or pipework running through walls, which indicates a remote system.

EquipmentTypical removalGuide price
Under-counter commercial fridgeCollected wholefrom £80
Bottle cooler or back bar fridgeCollected wholefrom £80
Upright display chillerCollected whole, two-person crewfrom £80, more for large units
Ice machineWater disconnected, collected wholefrom £80
Remote or split systemsEngineer recovers refrigerant firstRecovery priced separately

Refrigerant recovery

Refrigerants in commercial equipment may include ozone-depleting substances in older units, or fluorinated greenhouse gases in many newer ones. Ozone-depleting substances must be recovered and destroyed rather than released, under retained Regulation (EC) No 1005/2009 and the Ozone-Depleting Substances Regulations 2015.

For larger or remote systems, refrigerant recovery should be carried out on site by an engineer with the appropriate qualifications for handling refrigerants. That cost is usually priced separately from the collection, because it depends on the system size and the amount of gas. Plug-in units are generally collected whole and degassed at the treatment facility.

Where equipment is being replaced rather than simply removed, the engineer installing the new system often recovers the refrigerant from the old one as part of the job. Check whether this is included in the installation quote, so you do not pay for the same work twice. Ask for a record of the refrigerant recovered, which is useful for your own environmental records and may be required for certain equipment.

Paperwork and your duty of care

Businesses have a duty of care for all waste they produce. That means only passing waste to authorised people, such as registered waste carriers, and keeping records. For non-hazardous waste, a waste transfer note is used. For hazardous waste, which includes commercial refrigeration containing ozone-depleting substances, the correct hazardous waste paperwork must accompany the movement in England and Wales, with equivalent special waste arrangements in Scotland.

Keep copies of all paperwork for the required period. If your waste is fly-tipped or handled illegally by a contractor you did not check, your business could be held responsible.

  • Use a registered waste carrier for every collection
  • Check registration on the public register
  • Get the correct paperwork for the waste type
  • Keep copies of all transfer and consignment records
  • Ask which treatment facility the equipment goes to
  • Arrange refrigerant recovery for remote systems

Planning a removal

Commercial removals often happen around refits, closures or equipment upgrades, when timing matters. Schedule collections out of trading hours where possible, and coordinate with your refit contractor so old units are removed before new ones arrive. Empty and defrost units in advance, and clean out any food residue, which can attract pests while units wait for collection.

Tell the collector about access, such as narrow rear doors, steps, basement storage or restricted loading times. Larger display chillers may need doors or shelves removing, and ice machines need their water supply disconnected.

For businesses in shopping centres, retail parks or managed buildings, check with the landlord or centre management about loading bays, service lifts and permitted times. Many centres require contractors to provide insurance details and a method statement before working on site, so allow time for this when booking.

Multiple units and refits

Pubs, restaurants and shops often replace several units at once. Collecting everything in one visit is usually more cost-effective, with additional appliances from £25 each on the same visit for smaller items. For large refits, ask for a quote covering all equipment, refrigerant recovery where needed and any other waste electrical equipment being removed.

Working equipment in good condition may be suitable for resale or reuse through commercial catering equipment dealers. This can reduce disposal costs, but make sure anything sold is clean, safe and accurately described.

Keep a simple list of all equipment removed, with dates and paperwork, for your records.

Choosing a contractor

Look for a contractor who holds waste carrier registration, can explain how refrigerant will be handled for your equipment, provides the correct paperwork, and has public liability insurance. Ask where the equipment will be taken and whether that facility is authorised to treat refrigeration waste. A clear, itemised quote covering collection and any refrigerant recovery avoids surprises and gives you the records you need to show you met your duty of care.

Agree the collection time in writing, especially for out-of-hours work.

Questions people also ask

How much does it cost to dispose of a commercial fridge?

Commercial fridges and display chillers typically cost from £80 per unit to collect and recycle, depending on size and weight. Larger or remote systems may need refrigerant recovered by an engineer before removal, which is priced separately. Additional smaller appliances on the same visit start from £25 each.

Do commercial fridges need degassing before collection?

Plug-in commercial fridges are usually collected whole and degassed at the treatment facility. Remote or split systems, where the condensing unit is separate, need an engineer to recover the refrigerant on site before the pipework is disconnected and the equipment removed.

What paperwork does my business need for fridge disposal?

You need records showing your waste was passed to an authorised person. For non-hazardous waste that is a waste transfer note. Commercial refrigeration containing ozone-depleting substances is hazardous waste, so the correct hazardous waste paperwork is needed in England and Wales, or special waste arrangements in Scotland.

Written and checked by the Fridge Freezer Disposal team. Read our editorial policy.

Get a free fridge freezer disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote